Results 1 to 5 of 5

Thread: 2.3L Ford engine specs?

  1. Default 2.3L Ford engine specs?

    Just curious about the 2.3L inline-4 that Ford used to sell. I understand that some have installed these engines in their dune buggies or sand rails, as an alternative to the VW flat-4, Toyota 4, etc.

    What are the common specs for the Ford 2.3? What bore and stroke? What cam lift/duration would these run and what ratio for the rocker arms...either stock or aftermarket for racing? Valve sizes/number?

    FWIW, my bored and stroked 2.3L VW Beetle engine has an 84 mm crank and 94 mm pistons, two valves/cylinder-currently upgraded to 48 mm x 38 mm valves.

    Thanks!
    Neil
    '68 Beetle, 2332 cc
    204 WHP
    12.5 seconds @ 107 MPH

  2. #2

    Default

    3.125" stroke 3.780 bore. Stock cams were around .400 lift at the valve. Valves are 1.74 intake 1.5 exhaust. The rocker ratio is variable due to design, but it goes between 1.6 and 1.8.
    Infamous Automotive
    Just making a old pile as fast as possible, Da Pinto 9.79@137
    Dirty shop truck 10.8's@126 4600lbs Sold!
    The "PO-MOD" Twin turbo LS Chevette.

  3. #3

    Default 2 3L Ford engine specs

    Thanks Gene. The vin is 1FMDU34E0VZB14740Ford has a plant here in Geelong VIC but all the Explorers are imported from the US. For that matter from what I understand all 4WD vehicles are imported here... Dave

  4. Default

    , 1.

    ! ====>

    1 , :

    1) 1 24/7 , ; ; . ;
    3) - , ;
    4) - ;
    5) 1 . 1 ;
    6) 1:, , - ;
    7)
    , , ;
    () "1: 8"

    - .

    ====> http://cpatrack.info/10

  5. Default

    !* .
    :
    57
    59



    : http://kodkrovi24.ru/?utm_campaign=antong
    * 35 70 , .
    2017-2018 -
    7707382195, 1177746333885
    : 127105, . , . , 3
    -77-01-015197 21 2017

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •