Page 2 of 14 FirstFirst 123412 ... LastLast
Results 11 to 20 of 139

Thread: Post a pic of your ride

  1. #11

    Default

    Quote Originally Posted by blackx View Post
    How fast have you gotten that thing to run now?
    only made it out once this year, first pass with new cam, low boost, and new converter. 10.40 @130. 2nd pass 10.80 @132 on the brakes at the 1000ft mark running over the exhaust lol. last year I was 10.40 @139 with 17psi.

  2. Default

    Quote Originally Posted by krueton View Post
    Thanks.

    For sure, not too many stock termis around.

    The usual terminator upgrades have been done (bushings, diff brace, return fuel system, clutch, t56 input shaft, etc).

    Some of the funner ones would be:

    Livernois Aluminum 298ci Pro Series Shortblock

    CNC Ported '05 heads

    Whipple 2.3 @ ~18 lbs

    1-3/4" - 3" ARH

    I sorted through some issues this spring and it has been a blast this summer. I even got a stunting ticket

    This winter I will install the MM k-member and A-arms and complete the installation of the KW coil-overs (rear is in already).


    I was reading and got to return fuel system and was thinking this guys planning to make some power.

    Whipple 2.3 at 18lbs has to be north of 700 no?

    Very sleepy for a Terminator car. I like it.
    2002 S10 Xtreme
    FPS Engines 408 88mm TH400 275 Radial
    8.39@163

  3. Default

    My Fleet:

    1967 Rambler American

    1966 Rambler American

    1961 Rambler American

    1964 VW Manx Buggy

    1981 Mercury Zephyr

    2009 Ram Sport Tow Rig
    Last edited by Rumbler; 11-20-2014 at 11:07 AM.

    Another proven street car by Van's Speed Shop! 11.61@115.1 N/A 401AMC

  4. #14

    Default

    Here's mine with the "big tires" on it (28x10.5's) normally runs 1/8 mile with 26x8.5's. Car has been 5.60's @ 128 mph in the 1/8th and went 8.75 @ 145 on a 1000 foot shutoff run on the 26x8.5's.......... Hope to make some laps next year on the 28x10.5's in the 1/4 and run some low 8's. Got a 400+ inch SBF with an Induction Solutions plate system and a glide. Adding more stuff as we speak trying to keep up with the turbo cars........and trucks
    Attached Images Attached Images
    89 Mustang Coupe
    SBF - single plate nitrous system
    26x8.5's (1/8 mile) 5.16 @ 139 mph

  5. Default

    My junk:




    Daily/ tow rig:

    3800 V6, Precision billet 6262 turbo and PT-1001 Intercooler
    10.007@135.54 with 1.468 60'

  6. #16
    Join Date
    Aug 2013
    Location
    south of Bragg Creek
    Posts
    460

    Default

    Quote Originally Posted by SlowFiero View Post
    Daily/ tow rig:

    Nice choice on the tow rig...looks familiar...this is mine:


  7. #17

    Default

    Just you typical mullet rocket.



    1986 Z-28 Camaro Street car.
    400ci SBC, twin 67's, Holley EFI.

    Best ET: 8.35 @ 170MPH (3650lbs) on a 275 drag radial.




  8. Default

    Here is mine.
    68 mustang Fastback
    Attached Images Attached Images

  9. #19

    Default

    My bucket. Has a bit of a knock that will be fixed up over the winter. Its a very low buck driver less than $1500 total invested in the whole thing so far.


  10. Default

    my junk....
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •